Telescopic Sliding Gates
These gate systems have been specially designed in house by a team of experienced engineers, each using their expertise to ensure the system is the best it can be. Telescopic sliding gates are bespoke systems and will be designed to suit the opening, runback and infill of your choice.
On occasion an entrance requires a sliding gate system due to cross falls or because there is not enough room for swing gates to work. We would then advise that a cantilever sliding gate is required, but if you don’t have enough room for it to open (the opening plus a third and 1m) a telescopic gate could be an option.
These gates are in two pieces (sometimes 3 or 4) and are connected together by a series of pulleys and steel ropes. They run along a heavy duty bottom track that is bolted down to a concrete foundation in the ground. All the gates and posts are made in house therefore the customer can choose any of the following infills; from mesh infill, palisade infill, round bar or square hollow section.
They are first galvanised and lightly dressed to ensure longevity, before being pre-assembled in the workshop. If required we can powder coat them any colour you require, this helps to enhance the look of your installation.
All the gates are made to suit the exact requirements, before manufacture a CAD drawing would be issued for comments / approval.
Features at a glance
- Heights up to 2.5m
- Openings up to 7m with a runback of 4m.
- 100% rated, to be used all day everyday.
- Can be programmed to self close.
- Matching pedestrian gates available.
Due to the complexity of these gates they are completely manufactured, finished and tested in house. When the installation team arrive on site, they simply need to bolt down all the components.
We ensure that all the gate systems are fully compliant and have all the required safety features from obstacle detection to safety edges and photocells.
Do you have a question about this product ? why not give our sales team a call today on 01204 602518